Water Heater Replacement in Piqua, Sidney, Troy, OH, and Surrounding Areas
Burkett's Heating & Cooling
A water heating device could malfunction at any time. In addition, faulty water heater machines may induce problems such as loud noises throughout the heating cycle. It varies from an accurately operating water heater system and thus signifies that the system is breaking down and you require a water heater replacement. Contact Us Today for Water Heater Replacement in Piqua, Sidney, Troy, OH, and Surrounding Areas.

When Do You Require A Water Heater Replacement Services?
Here are some indications that you must schedule a water heater maintenance services:
- Problems with the thermostat
Before you conclude that your water heater is broken, check your thermostat to see if it is at the right temperature and adjust it if necessary. An ideal temperature should be between 120 and 140 Fahrenheit.
If adjusting the thermostat does not change the temperature, the thermostat may be broken, and you may need to replace it with a new one.
- Problems with heat supply
There could be numerous reasons your water heating device is not providing the needed heat. These comprise an obstructed voltage or power supply, a defective thermostat, and a flawed upper heating component.
So when it happens, it is better to check if the water heater’s circuit breaker has been tripped or if the fuse has blown over for the electricity problem. Also, inspect if the thermostat is getting power supply adequately.
- Water leaks
A common cause of a defective water heater is an excessive water leak. Leaks can happen due to extreme force, overheating, loose in-line valve, overhead or adjoining plumbing connection leak, a bad gasket, loosening of heating element bolts, leaks in the water tank, or even an obstructed valve.
- Deterioration of the pressure relief valve
The force relief valve is created to help keep the force in the water tank by freeing extra strain. Harm to this valve can induce leaks, and it becomes essential to substitute the pressure relief valve.
- Cracked dip line
The dip line is responsible for taking cold water to heat the tank’s bottom. You can lower the water to be heated if there is harm to the dip line in the form of a rupture or gap. As a result, chilly water will get discharged prematurely into your faucets and showers.
- Sediment accumulation
Another common cause for your water heater could stop supplying hot water and demand replacement is the accumulation and sedimentation of extra minerals over time. Minerals like magnesium and calcium can accumulate at the bottom of the water tank, taking up space for reserving hot water.
As a result, your home’s hot water supply will be cut short. Solving this issue is effortless as you must flush the water heater to empty the sedimentary particles.
- Rust
Rust and corrosion can impact various parts of the water heating device, such as the heater’s anode rod or water tank. A telltale indication of rust in your water heater is the discoloration of the accumulated water.
If you are experiencing problems with your water heating device and are planning a water heater replacement, Burkett’s Heating & Cooling experts can help.
Call us at (937) 773-8350 to book an appointment or learn more about our affordable and efficient services.